Is it possible to visit a water pumping windmill and a industrial windmill at the same location

1. How far can a windmill pump water?
2. Can a windmill pump water uphill?
3. How much head can a windmill pump?
4. How is wind energy used in pumping water?
5. How much does an old windmill cost?
6. How much does a water windmill cost?
7. Can you Syphon water uphill?
8. How can I pump water without electricity?

How far can a windmill pump water?

A typical windmill with 8 diameter wheel can lift water 185 feet and pump about 150 gallons an hour in 15 to 20 mph winds when using a 1 ¾ “pump cylinder.

Can a windmill pump water uphill?

A stuffing box is only needed on a windmill if you have to pump water uphill to a tank, but not needed if your water will go downhill to a storage tank, or horizontally into a watering trough or pond.

How much head can a windmill pump?

How far can the water be pumped? The powerful action of the Comet Windmill can push the water (depending on the size of the windmill head, and the pump diameter) up to 1,000ft.

How is wind energy used in pumping water?

Water-pumping windmill

The rotor is coupled with a reciprocating pump of 50–150 mm diameter through a connecting rod. Such windmills start lifting water when wind speed approaches 8–10 kilometres (km) per hour.

How much does an old windmill cost?

We also typically use the 33 foot tower for the heavier 10 foot windmill to provide a stable installation.
...

How much does a water windmill cost?

$1,300,000 USD per megawatt. The typical wind turbine is 2-3 MW in power, so most turbines cost in the $2-4 million dollar range. Operation and maintenance runs an additional $42,000-$48,000 per year according to research on wind turbine operational cost.

Can you Syphon water uphill?

A siphon is a way to carry water uphill without the use of pumps. ... A combination of gravity and atmospheric pressure drives the water through the hose, even if parts of the hose take the water uphill. Fill one container with water and place it on the higher surface.

How can I pump water without electricity?

All you need to do is add enough 2″ diameter PVC pipe (available from any hardware or plumbing supply store) to reach the water. You can tell how far it is to the water by dropping a weighted string down into the well. Like any shallow well pump, it may need priming the first time you use it.