How different are US weigh stations for trucks than Canadian ones?

1. Why do some trucks stop at weigh stations and some don t?
2. How do you avoid truck weigh stations?
3. Why do trucks stop at weigh stations?
4. Who has to stop at weigh stations Canada?
5. Is it illegal to go around weigh stations?
6. Do I have to stop at weigh stations with an RV?
7. Is Bobtailing illegal?
8. What size truck has to stop at weigh stations?
9. What happens if a truck doesn't stop at a weigh station?
10. What happens if a truck is overweight at a weigh station?
11. What do weigh stations check for?
12. How much does it cost to weigh a truck?

Why do some trucks stop at weigh stations and some don t?

In short, truckers who have PrePass generally get to bypass the scale, and the scales have the ability to monitor it. When the trucks are due for inspections, PrePass will send them through the scales until they receive and pass a full mechanical/driver inspection.

How do you avoid truck weigh stations?

If you're trying to avoid the weigh stations, you can either take an alternate route or wait until the weigh station closes. Weigh station apps will be incredibly helpful no matter which method you choose, as they'll tell you where the weigh stations are located as well as when they're open or closed.

Why do trucks stop at weigh stations?

After all, roads and bridges can only handle so much weight. If a truck is over the regulated weight limit, it could cause irreparable damage to the highway. A truck's tires, breaks, contents and other features can also be inspected at a weigh station to ensure that they are in compliance with local laws.

Who has to stop at weigh stations Canada?

As per the highway traffic act in Ontario, any commercial truck that weighs more than 4,500 kg in gross weight must stop at a weigh station.

Is it illegal to go around weigh stations?

In many areas if you jump off and back on within a few miles of a scale house and do not have business on the route you took then yes it is often illegal. In other areas it is perfectly acceptable to take an alternate route, just make sure that it does not look like you purpose for the route is to bypass scales.

Do I have to stop at weigh stations with an RV?

The short answer to this is no, you do not have to stop at a weigh station. A weigh station is only for commercial vehicles that are hauling freight. ... If you are worried about your RV's weight and want to make sure that you're not overloaded, you can pull into a weigh station and get weighed, but it's not required.

Is Bobtailing illegal?

There's nothing illegal about the practice, and trucking wouldn't be possible without bobtailing. A tractor without a trailer has most of its weight on its front wheels and very little on its rear wheels.

What size truck has to stop at weigh stations?

Most states have requirements that any truck that weighs 10,000 pounds or more has to stop at any, and all, weigh stations. For some states this weight can be higher, but the rule is the same - all commercial trucks should stop at every weigh station when they are open.

What happens if a truck doesn't stop at a weigh station?

For example, if a trucker skips a required weigh station, they could be pulled over by a law enforcement officer, who may direct the trucker to drive back to the weigh station. ... And that can lead to additional delays because even more of your trucks could be required to stop at weigh stations on the future.

What happens if a truck is overweight at a weigh station?

A truck company can be fined $65 per pound for overweight loads up to 10,000 pounds. After 10,000 pounds overloaded, the fine increases to $125/pound. State laws vary throughout the country. Many states only charge a few pennies per pound when the load is overweight.

What do weigh stations check for?

Weigh stations are used to check a truck's weight to ensure it is not overweight and is compliant with state laws and safety guidelines. The weight of a truck is usually calculated in two measurements: Axle Weight – The amount of weight carried by each tandem axle on a truck.

How much does it cost to weigh a truck?

Current prices for CAT Scale is: first weigh - $12.00, reweigh - $2.50, maximum cost per 24 hour period at the same location—$19.50.